HomeMediaArticle Display

Maintenance team makes face masks for Texas Air Guard members

Staff Sgt. Paul Renker, 149th Maintenance Squadron hydraulics technician, wears a mask he made on his personal 3D printer for people in his unit who might need one after initial guidance came out about use and wear for Air Force personnel. (Air National Guard photo by Mindy Bloem)

Staff Sgt. Paul Renker, 149th Maintenance Squadron hydraulics technician, wears a mask he made on his personal 3D printer for people in his unit who might need one after initial guidance came out about use and wear for Air Force personnel. (Air National Guard photo by Mindy Bloem)

Master Sgt. Carlos Gil, 149th Maintenance Squadron aircraft metals technician, wears a mask he made on his personal 3D printer April 14 at Joint Base San Antonio-Lackland, Texas. Personnel from the unit’s shop have now begun printing solid-colored masks for members who need something to meet more specific guidance recently put in place for 149th Fighter Wing members. (Air National Guard photo by Mindy Bloem)

Master Sgt. Carlos Gil, 149th Maintenance Squadron aircraft metals technician, wears a mask he made on his personal 3D printer April 14 at Joint Base San Antonio-Lackland, Texas. Personnel from the unit’s shop have now begun printing solid-colored masks for members who need something to meet more specific guidance recently put in place for 149th Fighter Wing members. (Air National Guard photo by Mindy Bloem)

Two variations of solid colored masks with accompanying filters sit in a crate at the 149th Fighter Wing’s aircraft technology shop April 14 at Joint Base San Antonio-Lackland, Texas. Personnel from the unit’s shop have now begun printing solid-colored masks for members who need something to meet more specific guidance recently put in place for 149th Fighter Wing members. (Air National Guard photo by Mindy Bloem)

Two variations of solid colored masks with accompanying filters sit in a crate at the 149th Fighter Wing’s aircraft technology shop April 14 at Joint Base San Antonio-Lackland, Texas. Personnel from the unit’s shop have now begun printing solid-colored masks for members who need something to meet more specific guidance recently put in place for 149th Fighter Wing members. (Air National Guard photo by Mindy Bloem)

Staff Sgt. Joshua Turner, 149th Maintenance Squadron aircraft metals technician, watches as the personal 3D printer he brought into his shop April 14 prints filter covers at Joint Base San Antonio-Lackland, Texas. Personnel from the unit’s shop have now begun printing solid-colored masks for members who need something to meet more specific guidance recently put in place for 149th Fighter Wing members. (Air National Guard photo by Mindy Bloem)

Staff Sgt. Joshua Turner, 149th Maintenance Squadron aircraft metals technician, watches as the personal 3D printer he brought into his shop April 14 prints filter covers at Joint Base San Antonio-Lackland, Texas. Personnel from the unit’s shop have now begun printing solid-colored masks for members who need something to meet more specific guidance recently put in place for 149th Fighter Wing members. (Air National Guard photo by Mindy Bloem)

Staff Sgt. Paul Renker, 149th Maintenance Squadron hydraulics technician, cuts some material to act as a filter for a mask he made on his 3D printer for people in his unit who needed one after initial guidance came out about use and wear for Air Force personnel. (Air National Guard photo by Mindy Bloem)

Staff Sgt. Paul Renker, 149th Maintenance Squadron hydraulics technician, cuts some material to act as a filter for a mask he made on his 3D printer for people in his unit who needed one after initial guidance came out about use and wear for Air Force personnel. (Air National Guard photo by Mindy Bloem)

Staff Sgt. Paul Renker, 149th Maintenance Squadron hydraulics technician, shows a mask he made on his personal 3D printer for people in his unit who needed one after initial guidance came out about use and wear for Air Force personnel. (Air National Guard photo by Mindy Bloem)

Staff Sgt. Paul Renker, 149th Maintenance Squadron hydraulics technician, shows a mask he made on his personal 3D printer for people in his unit who needed one after initial guidance came out about use and wear for Air Force personnel. (Air National Guard photo by Mindy Bloem)

JOINT BASE SAN ANTONIO-LACKLAND, Texas – When guidance came out that personnel on base should wear face coverings when within 6 feet of each other, one Air National Guard member with a personal 3D printer figured he could help.

Staff Sgt. Paul Renker, a 149th Fighter Wing hydraulics technician, stepped up to assist those who needed to adapt to the guidance quickly but did not have a suitable face covering.

“I’ve always tried to help other people if I can,” Renker said. “I also wanted to prove to myself and to my family the worth of buying a 3D printer in the first place because it has been printing baby Yodas and random stuff, so now that I actually have a useful purpose for it, it’s pretty cool.”

After Renker gave away his first 3D printed mask to a coworker, word soon spread to his leaders, who asked him if he would make as many as he could.

Renker asked some members of his squadron’s aircraft metals technology shop – more commonly known as the machine shop – if they wanted to help print some out, too. They did.

“Before I got my 3D printer, I went over there a lot to learn from them because their shop has one, so I developed a good rapport with them,” Renker said. “With those guys being over there, I knew they would want to help, too.”

When newer guidance specific to 149th Fighter Wing members came out stating that coverings should be solid colors or of current service camouflage pattern, Renker and the machine shop members once again began printing masks, this time of solid color.

Members were given some time to adjust to the changes but were asked by wing leadership to get help from their supervisors if they did not have something readily available. Thanks to Renker and the machine shop staff’s volunteer efforts, supervisors have been able to provide an easy way to meet the guidance, which allows Air Guard members to stay focused on the F-16 flying mission without having to stress about where they can find a proper face covering.

“A lot of us already have (3D printing) machines at home as part of our hobbies,” said Master Sgt. Carlos Gil, 149th Maintenance Squadron aircraft metals technology. “We’re able to print at home so that way we don’t interfere with the flying mission.”

Gil said even though it preoccupies a large part of his home time, he loves what he does and that it feels patriotic to him.

“An ounce of prevention is worth a pound of cure,” Gil said. “It’s better to have one than not have one. They are here for anyone that needs one, and I’m going to keep doing it until we are told to stop.”

Contact Us

ANG Public Affairs does not act as an operator service. They do not have the capability to redirect incoming calls to other offices. Please contact the base operator for these services. For a RECRUITER click HERE

Base Operator 301-981-1110

ANG Public Affairs
3500 Fetchet Avenue
Joint Base Andrews, MD 20762
(240) 612-9494

NGB Press Desk
703-601-6767